|
|
|
|---|---|
|
Application Method
|
Brush, Roll, Spray
|
|
Brand
|
Fastbond™
|
|
Color
|
Neutral
|
|
Environmental Considerations
|
California Air Resources Board, GREENGUARD® Certified, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission, SCAQMD
|
|
Flame Retardant
|
Non-flammable
|
|
Heat Resistance
|
<230 Degree Fahrenheit
|
|
Industries
|
General Industrial
|
|
Open Time
|
30 minutes to 4 hours
|
|
Physical Form
|
Thin liquid
|
|
Product Form
|
Bulk
|
|
Solids Weight Percent (Approximate)
|
42.4 to 50 Percent
|
|
Substrate 1
|
Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Glass & Ceramics, Leather, Metal, Paper & Cardboard, Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM), Wood & Hardboard
|
|
Substrate 2
|
Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Glass & Ceramics, Leather, Metal, Paper & Cardboard, Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM), Wood & Hardboard
|
|
Units per Case
|
12
|
|
Volatile Organic Compounds (VOCs)
|
37 Grams Per Litre
|
- Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
- Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range
- Adhesive can be applied by spray, brush or roller
- Non-flammable in the wet state
3M™ Fastbond™ Contact Adhesive 30NF is a water-dispersed, high-strength adhesive that has high coverage, immediate bond strength, a long bonding range and good heat resistance. Our adhesive bonds most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas to themselves and to each other.
We designed 3M™ Fastbond™ Contact Adhesive 30NF to create a very strong bond resistant to high heat with a bonding range of up to four hours. It is deal for decorative laminate applications where non-flammability and low VOCs are critical. Post-formable and heat resistant, it is non-flammable in the wet state, which makes in an optimal solution in settings where fire protection is of utmost concern.
Recommended Applications
- Most formed plastics
- Plastic laminate
- Wood
- Plywood
- Wood veneer
- Canvas
High Immediate Strength, Long Bonding Range
Formulated to be a fast-acting solution, 3M™ Low Mist Contact Adhesive 30NF delivers high immediate bonding strength with a long bonding range. Our design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments. With 3M™ Low Mist Contact Adhesive 30NF, you can leverage the advantages that come from an adhesive that is ready to meet the demands of many tough applications.
Applying Your Adhesive
Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
3M Qatar
Qatar - English
